The Acoustimass 300 is a wireless bass module with a 10-inch woofer, a QuietPort port, a built-in amplifier, a glass top panel and a minijack input for wired use. Because it is powered, bass can disappear for electronic reasons (the amplifier, the power section, the wireless link) or for mechanical ones (the woofer or port). We work out which it is before suggesting a repair, and tell you plainly what it involves.
Recognise your problem below. Bass faults have several possible causes, which is why the module is tested before anything is promised.
No sign of life when plugged in and switched on.
Powered and apparently paired, yet the woofer stays silent.
A steady hum from the module even when nothing is playing.
Rattling, flapping or muddy low notes, especially at higher volume.
Refuses to link with the soundbar, or the connection keeps dropping.
No bass over the minijack cable, or crackling when the cable moves.
Bass disappears at loud scenes or after the module warms up.
Whooshing or chuffing from the port on deep bass notes.
Faulty after a fall, a heavy impact or being moved with the power cord connected.
The Acoustimass 300 was made for an older Bose
soundbar system and is no longer available new. A fault
is often a single part: a failed amplifier component, a
worn input socket, a wireless fault or a tired woofer. The
heavy cabinet and the rest of the module are usually
perfectly sound.
We find the failed part, explain the repair and tell you
honestly whether it is worth doing on your unit.
It depends on what has failed. Compare the two routes before you spend.
Describe what the module does, and which soundbar it is used with.
Power, amplifier, woofer and wireless link are tested until the cause is found.
You hear what failed, whether it can be repaired and what it would cost.
After repair it is played with test tones and a wired signal before it is returned.
Units as they arrived and as they left the bench.
A price follows a finding, never the other way round.
Electronic and mechanical faults are each ruled in or out.
A wired signal shows whether the fault is pairing or the module.
If a unit cannot be repaired sensibly, we tell you so up front.
Describe what it is doing and we will tell you the sensible next step.